เครื่องวัดค่า ORP, รีด็อกซ์มิเตอร์(ORP-169B)

Product Description:

The ORP-1692 is equipped with HIGHLY ACCURATE ORP/Redox measuring devices and CE mark that means it PASSES the EUROPEAN STANDARDS (CE). Complete with a mini screwdriver, operating manual, 2 batteries so it's ready for use straight out of the box. The instruction manual for use and calibration all fit neatly onto the front cover of the sturdy case and reading the results wouldn't be difficult as it has a clear and large digital LCD display and gives you result in no time. ORP-1692 offers high specifications and value-for-money price coupled with being extremely easy-to-use and easy-to-calibrate. And because it's lightweight, portable and doesn't need an electricity you are not bounded to one place, you can bring and use it anywhere and anytime you want!

Oxidation-Reduction Potential (ORP) or Redox potential measurements are used to monitor chemical reactions, to quantify ion activity, or to determine the oxidizing or reducing properties of a solution. ORP technology has been gaining recognition worldwide and is found to be a reliable indicator of bacteriological water quality for sanitation. In swimming pool application, it helps Kill E.Coli bacteria the fastest way to ensure good water quality.

ORP measurement can be utilized very successfully in many applications, from Aquarium & Koi, Swimming pool & Spa, Laboratory & Hospitals, Nutrients, Hydroponics, or any other water application.

Own an accurate and reliable ORP-1692 that's so easy to use! Just Turn On, Dip, Stir and Read!

• Provides accurate readings
• Lightweight and easy to use
• Has easy to read and clear digital LCD display
• Includes 2 button batteries so you can bring and use it anywhere
• Comes with an easy to read user manual to guide the user in using it properly

 

Specifications:

• Measuring range: 0~±1999mV
• Accuracy: ±5mV
• Resolution: 1 mV
• Display: 4-digital LCD
• Operating temperature: 0°C - 50°C
• Power Supply: 2×3V CR2032 Battery
• Calibration: use mini screw driver
• Dimensions: 150mm × 27mm × 20mm
• Weight: 48g

Operating Information:

• Press the ON/OFF key to turn the meter on.
• Immerse the electrode in the solution to be read or tested.
• Stir gently and wait for the reading to stabilize.
• Press the HOLD key to keep the reading on the LCD display screen. To measure again, press HOLD key to automatically clear the display.
• After use, press the ON/OFF key to turn OFF the meter. Rinse the electrode with distilled water to minimize contamination.
• Use filter paper to absorb moisture then put the protective cap on.

Calibration:

• Immerse the meter in distilled water. Activate it after a few hours.
• Immerse the meter in the calibration solution and stir gently.
• Regulate the calibration screw at the back with the mini screwdriver until the LCD screen shows 265 mV.
• Rinse the electrode with distilled water. Don't forget to use filter paper to absorb moisture.

Battery Installation:

• If the meter can not be switched on or the display fades, check the voltage of power supply.
• Replace the batteries when the voltage is lower than 4 - 4.5V.
• Pay attention to the polarity when replacing batteries.

 

Accessories included:

• User's Manual
• Mini-screw driver
• 2×3V CR2032 Battery
• Frosted White Sturdy Traveling
  

 

Packaging:  Frosted White Sturdy Traveling